Welcome to your Crumbrella!
Thank you for your purchase. This page will walk you through installing your custom-fit Crumbrella.
Installation Instructions
Your Crumbrella comes with everything you need - no tools required.
-
Prep the table legs Using the included alcohol prep pads (one per leg), clean the top 3 inches of each worktable leg, starting directly below the leg socket. Clean all the way around the leg. Allow the surface to dry completely before proceeding to next step.
-
Apply the hook tape - Peel backing from the adhesive hook tape. Starting at the outside edge of the leg, position the tape so the top edge sits directly below the bottom edge of the leg socket. Press the tape onto the leg, working your way around toward the backside of the leg (center of worktable). Keep the top edge of the tape aligned directly below the leg socket as you go. The ends of the tape will not meet. The gap between the ends should be positioned on the backside of the leg, facing the center of the worktable (see images below). Once positioned, press tape firmly against the worktable leg for 30 seconds to ensure a strong bond.
-
Label your Crumbrella - Before hanging your Crumbrella, label it so you always know which table each belongs to. This makes life easier and ensures the right Crumbrella goes back on the right table every time. EXAMPLE: 5' South Prep, Two Sides
- Attach your Crumbrella - Align the loop side of your Crumbrella with the hook tape on each leg. Your Crumbrella is now installed and ready to protect your undershelves.
Questions? Contact us — we're happy to help.